NSK Grease Lubricated Spherical Sliding Bearing (Without Seal) > GE40ES

Description

Dimensions B (mm): 28
Dimensions C (mm): 22
Dimensions D (mm): 62
Dimensions K (mm): 53
Dimensions d (mm): 40
Mounting Related Dimension (Max Da) (mm): 56.5
Mounting Related Dimension (Min Da) (mm): 54.5
Mounting Related Dimension (Max da) (mm): 44.5 (When used at maximum allowable inclination angle, the shoulder dimension of the shaft must be below the maximum value of da.)
Mounting Related Dimension (Min da) (mm): 44.5
Chamfer Dimension r1 (mm): 0.6 (Minimum allowable dimension)
Chamfer Dimension r2 (mm): 1 (Minimum allowable dimension)
Model: GE-ES Type
Outer Diameter (mm): 62
Application: Industrial machinery, construction machinery, etc.
Specifications: 1N is about equal to 0.102 Kgf
Material (inner ring, outer ring): High carbon chromium bearing steel (MoS2 coating)
Weight (kg): 0.315
Type: Without Seal
Angle (degrees): 7
Presence of Seal: Without Seal
Dynamic Load Capacity (N): 114000
Static Load Capacity (N): 686000
Angle 1 (degrees): –

Both the inner and outer rings are made of high carbon chromium bearing steel, and the sliding surface is treated with phosphate coating and covered with a dry film of molybdenum disulfide (MoS2), making it a bearing with low torque operation and excellent wear resistance and high load capacity. It is particularly suitable for alternating loads and impact loads.