Description
Dimensions B (mm): 20
Dimensions C (mm): 16
Dimensions D (mm): 42
Dimensions K (mm): 35.5
Dimensions d (mm): 25
Mounting related dimensions (maximum Da) (mm): 37.5
Mounting related dimensions (minimum Da) (mm): 37
Mounting related dimensions (maximum da) (mm): 29 (When used at the maximum allowable tilt angle, the shoulder dimension of the shaft should be below the maximum value of da.)
Mounting related dimensions (minimum da) (mm): 29
Chamfer dimension r1 (mm): 0.6 (minimum allowable dimension)
Chamfer dimension r2 (mm): 0.6 (minimum allowable dimension)
Type: GE-ES Type
Outer diameter (mm): 42
Applications: Industrial machinery, construction machinery, etc.
Specifications: 1N is about equal to 0.102 Kgf
Material (inner ring, outer ring): High carbon chromium bearing steel (MoS2 coating)
Mass (kg): 0.115
Type No Seal
Angle (degrees): 7
Presence of seal: No seal
Dynamic load capacity (N): 55700
Static load capacity (N): 334000
Angle 1 (degrees) –
Both the inner and outer rings are made of high carbon chromium bearing steel, and the sliding surfaces are treated with phosphate coating and covered with a dry film of molybdenum disulfide (MoS2), allowing for low torque operation and excellent wear resistance with a high load capacity. It is particularly suitable for applications involving alternating loads or shock loads.
Reviews
There are no reviews yet.