NSK Grease Lubricated Spherical Sliding Bearing (Without Seal) > GE20ES

Description

Dimensions B (mm): 16
Dimensions C (mm): 12
Dimensions D (mm): 35
Dimensions K (mm): 29
Dimensions d (mm): 20
Mounting related dimensions (maximum Da) (mm): 32.5
Mounting related dimensions (minimum Da) (mm): 30.5
Mounting related dimensions (maximum da) (mm): 22.5 (When used at the maximum allowable tilt angle, the shoulder dimension of the shaft should be less than or equal to the maximum value of da.)
Mounting related dimensions (minimum da) (mm): 22.5
Chamfer dimension r1 (mm): 0.3 (minimum allowable dimension)
Chamfer dimension r2 (mm): 0.3 (minimum allowable dimension)
Type: GE-ES type
Outer diameter (mm): 35
Application: Industrial machinery, construction machinery, etc.
Specifications: 1N is about equal to 0.102Kgf
Material (inner ring, outer ring): High carbon chromium bearing steel (MoS2 coating)
Mass (kg): 0.065
Type: Without seal
Angle (degrees): 9
Presence of seal: Without seal
Dynamic load capacity (N): 34100
Static load capacity (N): 205000
Angle 1 (degrees): –

Both the inner and outer rings are made of high carbon chromium bearing steel, with the sliding surfaces treated with a phosphate coating and covered with a dry film of molybdenum disulfide (MoS2), resulting in operation with low torque and excellent wear resistance, making it a bearing with a high load capacity. It is particularly suitable for alternating loads and impact loads.