NSK Grease-Lubricated Spherical Sliding Bearing (Without Seal) > GE12E

Description

Dimension B (mm): 10
Dimension C (mm): 7
Dimension D (mm): 22
Dimension K (mm): 18
Dimension d (mm): 12
Mounting Relation Dimension (Max Da) (mm): 19.5
Mounting Relation Dimension (Min Da) (mm): 17
Mounting Relation Dimension (Max da) (mm): 14.5 (When used at the maximum allowable tilt angle, the dimension of the shaft’s shoulder should be less than or equal to the maximum value of da.)
Mounting Relation Dimension (Min da) (mm): 14.5
Chamfer Dimension r1 (mm): 0.3 (Minimum allowable dimension)
Chamfer Dimension r2 (mm): 0.3 (Minimum allowable dimension)
Model: GE-E Type
Outer Diameter (mm): 22
Application: Industrial machinery, construction machinery, etc.
Specification: 1N is about equal to 0.102 Kgf
Material (inner ring, Outer Ring): High Carbon Chromium Bearing Steel (MoS2 Coating)
Weight (kg): 0.017
Type: Without Seal
Angle (degrees): 11
Presence of Seal: Without Seal
Dynamic Load Capacity (N): 12400
Static Load Capacity (N): 74100
Angle 1 (degrees): –

Both the inner and outer rings are made of high carbon chromium bearing steel, the sliding surface is treated with a phosphate coating, and covered with a dry film of molybdenum disulfide (MoS2), allowing it to operate with low torque and providing excellent wear resistance and high load capacity. It is particularly suitable for alternating loads and impact loads.