Description
Dimension B (mm): 25
Dimension C (mm): 20
Dimension D (mm): 55
Dimension K (mm): 47
Dimension d (mm): 35
Installation Related Dimension (Max Da) (mm): 49.5
Installation Related Dimension (Min Da) (mm): 48
Installation Related Dimension (Max da) (mm): 39.5 (When used at maximum allowable tilt angle, the shoulder dimension of the shaft should be below the maximum value of da.)
Installation Related Dimension (Min da) (mm): 39.5
Chamfer Dimension r1 (mm): 0.6 (Minimum allowable dimension)
Chamfer Dimension r2 (mm): 1 (Minimum allowable dimension)
Model: GE-ES Type
Outer Diameter (mm): 55
Application: Industrial machinery, construction machinery, etc.
Specification: 1N is about equal to 0.102Kgf
Material (inner ring, Outer Ring): High Carbon Chrome Bearing Steel (MoS2 Coating)
Weight (kg): 0.258
Type: No seal
Angle (degrees): 6
Presence of seal: No seal
Dynamic Load Capacity (N): 92200
Static Load Capacity (N): 553000
Angle 1 (degrees): –
Both the inner and outer rings are made of high carbon chrome bearing steel, and the sliding surface is treated with phosphate coating and covered with a dry film of molybdenum disulfide (MoS2), allowing for operation with low torque and excellent wear resistance with a high load capacity. It is particularly suitable for alternating loads and impact loads.
